Full-Size Electrolux front-load washers in the US and Canada and manufactured after early 2006 have a compatible vent for magnetic installation of Wasehr Fan Breeze on the back of the washer. Older Full-Size Electrolux front-load washers do not have a compatible vent, so Washer Fan Breeze is attached with magnets or straps in the washer's door. Please look at the back of your Electrolux front-load washer to determine if it has a compatible vent.
The Electrolux compatible vent is a round, white plastic vent.
A picture of the Electrolux compatible vent is attached to this article.
Watch our installation video entitled Washer Fan Breeze Magnetic Install over Vents on Electrolux Front Load Washers to see installation over the compatible vent on the back of Electrolux front load washers. This video can be found on our website under Support -> Installation -> Washers Purchased in the US & Canada -> Front Load -> Electrolux.
If doubtful, as to whether your Electrolux washer has a compatible vent, follow these directions. Submit a support ticket directly to our technical experts by using the link below. Attach a picture of the back upper half of your washer and, if possible, include your model number. By submitting a support ticket, you will be receiving a reply directly from our technical experts who can answer any questions. Our toll-free Call Center number is used primarily for accepting orders and providing general information; thus, it is unable to assist you with any technical questions.
The link to submit a support ticket directly to the Washer Fan technical experts is as follows:
http://washerfan.com/helpdesk/index.php?a=add
Attachments: E-1-Vent.jpg
« Go back
Loading knowledgebase suggestions...