Every Full Size Whirlpool front-load washer has a compatible vent. This will use the Washer Fan Breeze's magnetic design; the attached magnets hold the fan firmly in place. There are four types of Whirlpool compatible vents. The W-1 and W-2 vents have round plastic vents with a crisscross plastic waffle pattern. The W-3 vent has a metal louvered vent, approximately 3 inches x 3 inches square and the W-4 vent has round holes punched into the back of the washer’s sheet metal. All four vents are found on the top right-hand corner when looking at the back of your washer.
Pictures of Whirlpool compatible vents are attached to this article.
Watch our installation video entitled Washer Fan Breeze Magnetic Install over Vents on Whirlpool Front Load Washers to see installation over compatible vents on the back of Whirlpool front load washers. This video can be found on our website under Support -> Installation -> Washers Purchased in the US & Canada -> Front Load -> Whirlpool.
If doubtful, as to whether your Whirlpool front-load washer has a compatible vent, follow these directions. Submit a support ticket directly to our technical experts by using the link below. Please attach a picture of the back upper half of your washer and, if possible, include your model number. By submitting a support ticket, you will be receiving a reply directly from our technical experts who can answer any questions. Our toll-free Call Center number is used for accepting orders and providing general information; thus, they unable to assist you with any technical questions.
The link to submit a support ticket directly to our Washer Fan technical experts is as follows:
http://washerfan.com/helpdesk/index.php?a=add
Attachments: W-1--W-2-Vents.pdf W-3-Vent.jpg W-4-Vent.jpg W-5-Vent.jpg
« Go back
Loading knowledgebase suggestions...