Every Full-Size LG front-load washer has a compatible vent and Washer Fan Breeze can be attached magnetically over the vent on the back of the washer; the fan's attached magnets hold it firmly in place. There is only one LG compatible vent. It is a round, white plastic vent that is often hidden under the cold water line.
A picture of the LG compatible vent can be found attached to this article.
Watch our installation video entitled Washer Fan Breeze Magnetic Install over Vents on LG Front Load Washers to see installation over the compatible vent on the back of LG front load washers. This video can be found on our website under Support -> Installation -> Washers Purchased in the US & Canada -> Front Load -> LG.
If your L-1 vent is hidden under the cold water supply hose and your hose has a 90-degree elbow connected to the washer, you may need to turn it to the right (counterclockwise) to about the 4 o'clock position in order to install the Breeze over its compatible vent. Make sure to retighten the connection after moving the hose, so that it does not leak or drip water. Watch our installation video starting at 8:55 for more information about turning your cold water supply hose.
If doubtful, as to whether your LG washer has a compatible vent, follow these directions. Submit a support ticket directly to our technical experts by using the link below. Attach a picture of the back upper half of your washer and, if possible, include your model number. By submitting a support ticket, you will be receiving a reply directly from our technical experts who can answer any questions. Our toll-free Call Center number is used primarily for accepting orders and providing general information; thus, it is unable to assist you with any technical questions.
The link to submit a support ticket directly to our Washer Fan technical experts is as follows:
http://washerfan.com/helpdesk/index.php?a=add
Attachments: L-1-Vent.jpg Breeze-on-LG-Vent.jpg
« Go back
Loading knowledgebase suggestions...