 |
Washer Fan™ Breeze™ is designed to be as quiet as possible, as quiet as a ticking watch, while still moving more than enough air to permanently eliminate your washer odor in 21 days or les... |
|
|
No. The low volume of air flow is enough to eliminate your washer odor but not enough to interfere with normal operation of your washer; therefore, there is no need to unplug the Washer Fan Breeze at ... |
|
|
Yes, Washer Fan Breeze is still necessary to eliminate washer odor. No, Washer Fan Breeze will not interfere with your washer’s built in fan, or vice versa.
|
|
|
Washer Fan Breeze is designed to run continuously 24/7/365 and cost less than 8¢ per month to operate - based on a 10¢ per kilowatt-hour rate.
We do not recommend unplugging your Was... |
|
|
If your washer already has an odor, we strongly recommend replacing your washer's internal drain hose when installing your new Washer Fan.
|
|
|
You can clean the internal drain hose of your washer rather than replacing it; however, you must remove it from your washer and let bleach sit in the entire hose until the mold comes off in order ... |
|
|
Washer Fan Breeze will fit any style washer in the world.
If your Full Size, Front Load washer was sold in the US or Canada, your washer may have a vent on the back that would allow magnetic installa... |
|
|
Washer Fan Breeze does not need to circulate fresh air directly into your washer's internal drain hose in order to eliminate your washer odor problem. This is a very common question that we often addr... |
|
|
Some Samsung-manufactured washers have two compatible vents on the back. If the vents on the back of your washer look like either of the attached pictures (S-2 and S-3), either vent is compatibl... |
|
|
We recommend that you maintain your laundry room relative humidy below 50% year round.
If you are unable to keep the relative humidity under 50% with air conditioning or heat, we recommend that you p... |
|
|
The Washer Fan Team had the mold inside a washer's internal drain hose analyzed by an independent lab and in the sample tested, four different types of mold were found. These results are not certified... |
|
|
On our website (WasherFan.com):
1) Select "Shop" from the menu bar
2) Select "Partner Links" from the drop down menu
3) Click on "Repair Clinic" to be taken dir |
|
|
The vent on full size front load LG washers is on the back, hidden under the cold water supply hose. If your hose has a 90 degree elbow connected to the washer, you may need to turn it to the right (c... |
|
|
The three magnets at the base of Washer Fan Breeze housing are strong enough to securely hold the Breeze to your washer, even during the spin cycle, yet they are not so strong as to prevent you from r... |
|
|
We are not aware of any Top Load Washers, anywhere in the world, that have a compatible vent for the Washer Fan Breeze magentic installation on the back of your washer. All Top Load Washers worl... |
|
Loading knowledgebase suggestions...
